Light Dark
Polysius

Spare Parts ManagementThe right part, at the right time, over the entire lifetime.

Spare and wear parts play a critical role in maintaining plant availability and performance. We supply OEM parts for our installed base as well as third-party equipment and support customers throughout the operational lifetime of their equipment.

Key figures strip

OEM quality
State-of-the-art technology with guaranteed functionality

Any make
Also for plants engineered and erected by third parties

> 70,000 h
Service life of polycom® wear protection solutions, depending on the material ground

Worldwide
Service for repair and refurbishment

What We Offer

We support customers with OEM spare and wear parts throughout the operating life of their plants. Because the right spare and wear parts are key elements for the availability of your plant.

We supply OEM spare parts and components designed for your equipment and systems.

With long-term experience as an OEM supplier, we provide innovative spare parts concepts which meet your requirements regarding quality and performance. One part comprises the engineering and manufacturing of individual spare parts in accordance with your requirements. The other part includes the continuous development and enhancement of spare parts and components, in order to increase the availability of your plant.

Wear protection concepts are developed based on operating conditions, material characteristics and OEM application knowledge.

Not only our own machines

We also offer spare and wear parts for plants that were engineered and erected by third parties. Across the portfolio the same principle recurs: kiln statics applies to every rotary kiln regardless of the make, supporting rollers get a manufacturer-independent static recalculation, roller stations adapt to any baseplate, and a polytrack® cooler modification is possible even if the clinker cooler is from a different manufacturer.

OEM Engineering Advantages

OEM spare and wear parts are developed using knowledge gained from equipment design, materials engineering and long-term operational experience. This combination helps ensure that replacement parts meet application requirements throughout the lifecycle of the plant.
OEM advantageWhat it means
Equipment design knowledgeUnderstanding the original equipment design enables spare and wear parts to be aligned with the intended operating conditions and performance requirements.
Materials engineeringWear protection solutions and material concepts are developed based on application-specific wear mechanisms and decades of field experience
Design for maintainabilityComponents are continuously optimized not only for service life but also for efficient replacement and maintenance activities.
Lifecycle supportInsights from inspections, monitoring, refurbishment, and operations are used to further develop spare and wear part solutions over time.

Design for Replaceability

A wear part that lasts 14,000 hours is worth little if changing it costs a week. Across the portfolio the same design principle recurs: make the wearing element separable from everything that does not wear. Six examples, each linked to its product page.
ComponentWhat makes it replaceable
pneumatic kiln sealThe pneumatic inlet and outlet seals isolate the kiln process from the environment. The aim is to seal against false air, which has a negative impact on the process, the final quality of the product and energy consumption. Our kiln seals withstand high radial and axial movements of the kiln exceptionally well, especially in twostation kilns. The low-wear design ensures a long service life.
dopol® preheaterMultistage cyclone preheaters with integral calciner and tertiary air duct tailored to production capacities from under 1,000 to over 12,000 t/d. Prepol®-calculated cyclone designs without dip pipes for lower stages; heat-resistant, segmented dip pipes suspended at the outlet to stabilize vortices and boost separation efficiency. Air-cooled kiln inlet with specialized refractory lining for optimal meal flow and minimized dust recirculation, complemented by front-wall bypass systems for pollutant extraction and energy optimization.
polytrack® aeration unitsUncomplicated interchangeability makes the aeration elements perfectly suited for retrofitting; fully replacing the original design does not involve major adjustments
Coarse feed valveInspection covers and cleaning ports in the housing; sealing strips and cylindrical housing section made of wear protection plate; impact table protects the vane rotor
Girth gear and fasteningRealignment or turning of the gear rim possible at any time thanks to the symmetrical and low-wear attachment; in-built thermal protection keeps joints from gaping
Kiln bearing replacementNew roller station connected to the existing baseplate via an adapter plate; existing baseplates still usable, no foundation modifications, adapts to any baseplate

From Condition to Stock List

The most valuable spare part is the one already on the shelf when the shutdown starts. Getting there is not a procurement question but a measurement question. Four services in the portfolio exist precisely to turn machine condition into a stock list.

Shell plate thickness measured at regular intervals and recorded in writing; trends and actions analysed with the polysius® kiln statics procedure. Explicitly delivers spare parts procurement in due time and plannable replacement. Applicable to every rotary kiln regardless of the make

The quadropol® and dorol Expert Services analyse the entire mill system — mill, separator, coarse feed valve, fan, cyclone and filters — with measurements during operation and inspection of the grinding compartment during a stoppage

Radar-based level measurement enables fast and reliable congestion detection inside the hot cyclones, so measures can be taken at an early stage. No radiometric measurement, no radiation protection officer, nearly maintenance free

Both Expert Services list spare parts recommendations and calculable stocking of spare parts as an explicit service advantage, alongside recommendations for further optimisation steps and advice and training for personnel

Spare and Wear Parts by Process Step

Process stepMachineTypical spare and wear parts
CrushingDouble Roll CrusherCrushing segments (austenitic manganese cast steel or high-strength cast chrome), replaceable teeth in XAR or sinter cast, housing liners, scrapers, screws and nuts
Raw material feedCoarse feed valveSealing strips at the vane rotor, wear protection plate in the cylindrical housing section, impact table, spring-plate cell airlock parts
Raw & cement grindingBall Millpolalloy slotted and backwall plates, diapol 2.0 diaphragm segments, lifter scoops and heads, shear bolts and expansion sleeves, slide ring machining
Grinding — HPGRpolycom®Compound cast tires, forged roll bodies with studs or hardfacing, hard metal studs, side protection, shaft reuse in the two-part solution
Grinding — VRMquadropol® · dorolGrinding rollers and tables, nozzle ring elements, plus Expert Service inspection with spare parts recommendations
Product coolingFines coolerRotor spiral flights, antifriction bearings, bevel/spur gear unit, stainless steel water-wetted components for salty water
PreheaterDip pipes and cyclonesDip pipe segments in rolled sheet metal or cast, stabilising rings, stiffening ribs — available ex stock at short notice
Pyroprocessing — firingpolflame® VN · prepol® SCPrimary air nozzles, burner tip and mouthpiece, outer coal channel wear protection, fuel lances; refractory steps and air-blast nozzles on the step combustor
Pyroprocessing — kilnRotary kilnTyre pads and shim plates, supporting rollers and axles, girth gear and pinion, graphite blocks and wear rings, kiln outlet segments, shell sections
Clinker coolingpolytrack®Aeration units in the new standard design, labyrinth seals, clinker crusher parts — including conversion from hammer to roll crusher

Refurbishment

Sometimes the right spare part is the one you already own. Three cases from the portfolio where the expensive component stays and only the worn element is renewed.
Supporting roller with a new axle
The main load on a supporting roller is the shearing in the axle. In the event of a fault, the roller can be refurbished in one of our worldwide service workshops and fitted with a new axle, with due consideration to the number of load cycles
Reuse the shaft on the polycom®
Reuse of the shaft thanks to a two-part solution is listed among the service advantages of the wear protection program — the wear element is renewed, the shaft stays in service
Replace only the affected plate rings
When wear has been detected on polalloy plates, only the most affected plate rings need replacing, not the full set

Why OEM Matters

Guaranteed functionalityAll spare parts and components are supplied in OEM quality — state-of-the-art technology with guaranteed functionality (spare parts management)
Greatest reliability against breakageOf all wear protection solutions available worldwide, original compound castings from thyssenkrupp offer the greatest reliability against breakage and damage, so the efficiency of the polycom® roll can be utilized to the full (polycom® wear protection program)
Verifiable material valuesVerifiable characteristic values of the material are listed as a service advantage in their own right (polalloy)
Continuous product developmentContinuous product development and the ongoing enhancement of spare parts and components exist to increase the availability and performance of the plant over its lifetime (polycom® wear protection program, spare parts management)
The right spare and wear parts are key elements for the availability of your plant.

thyssenkrupp Polysius SolutionsService Team

The right part, at the right time,

over the entire lifetime.